How to Enable Bridge Mode for AudioCodes ATA

In order to setup Bridge Mode, you will need to log into the ATA's web GUI using a computer on the same network. To do this, you will need the LAN IP of the ATA. If the ATA is "Online", you can see the LAN IP from within the Faxback portal.

If the ATA is not "Online", Advanced IP Scanner is a useful tool for locating the LAN IP.  When setting it up, I typically use the "Run" mode instead of "Install".

 

Once logged into the Web GUI:

  1. Click Network Connections
  2. Click + symbol
  1. Select Advanced Connection
  2. Click Next
  1. Select Network Bridging
  2. Click Next
  1. Ensure both LAN Ethernet and WAN Ethernet are checked.
  2. Click Next
  1. Click Finish
Have more questions? Submit a request