Follow

Polycom Compatible Headsets Using Electronic Hookswitch

The following wireless headsets models are compatible with a connection from their base stations to the Polycom SoundPoint IP phones (except SoundPoint IP phone models 301, 501, and 601). Basic phone functions can be controlled using the electronic hookswitch (EHS) feature. Only the headsets indicated in parentheses beside each series name are compatible with a wireless connection to the SoundPoint IP phones using electronic hookswitch. The SoundPoint IP phone models 320, 321, 330, and 331 require a RJ-9 to 2.5 mm adapter as described in the preceding table.  In order to allow for auto answer/hangup function, you must buy the appropriate headset and adapter cable as indicated below. 


Jabra (GN Netcom)
To use electronic hookswitch, You must have one of the following headset AND a Jabra EHS Adapter (GN Netcom SKU 14201-17):
• Jabra GN9120 / Jabra GN9125
• Jabra GN9300e Series (GN9330e, GN9350e)
• Jabra GN9350
• Jabra GO 6470
• Jabra PRO 9400 Series

Plantronics
To use electronic hookswitch, the Savi Office Series models must be equipped with a Plantronics APP-50 cable (Plantronics SKU 38439-01) while the CS Series must be equipped with a Plantronics APP-5 cable (Plantronics SKU 38438-01). The following models are compatible:
• Savi Office Series (WO100, WO200, WO300, WO350 only)
• CS Series (50, 55, 60, 70N, 261N, 351N only)

Sennheiser
To use electronic hookswitch, the following headset models must be equipped with a Sennheiser EHS Polycom adapter (Sennheiser part number CEHS-PO 01):
• DW Series* (Office, Pro 1, Pro 2)

Logitech
To use electronic hookswitch, the following headset model must be equipped with a Jabra EHS Adapter (GN Netcom SKU 14201-17):
• Logitech BH 970

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    Level365 Support Agent

    The above headset cables are also supported for the newer VVX model series.

Powered by Zendesk